TRAINING SAFETY ORDER OF PRECEDENCE UNTUK PRAKERJA
System Safety Engineering And Management (BANDUNG)
TRAINING PURPOSE: pelatihan Safety order of precedence online
1. The system safety engineering and management is intended to describe “how” to set up and implement the safety risk management process.
2. The system safety engineering and management establishes a set of consistent and standardized procedures and analytical tools.
3. The system safety engineering and management is intended for use in support of specific system safety program plans.
4. The system safety engineering and management provides guidance on “how” to perform safety risk management, other questions concerning “when, who, and why” should be addressed through the three types of plans discussed in this document: System Safety Management Plan (SSMP), and a System Safety Program Plan (SSPP), and an Integrated System Safety Program Plan (ISSPP).
5. The system safety engineering and management focuses on “how” to perform safety risk management, while these planning documents describe, the organization’s processes and procedures for implementing system safety.
TRAINING MATERIAL OUTLINE: pelatihan System Safety Guidelines online
1. Principles of System Safety
• Planning principles
• Hazard analysis
• Comparative safety
• Risk management decision making
• Safety order of precedence
• Behavioral-based safety
• Models used by system safety for analysis
2. Safety Assessments Before Investment Decision
• Safety assessments before investment decision
• Operational safety
• Comparative safety assessment (CSA)
3. Post-Investment Decision Safety Activities
• Post-investment decision safety activities
• Objectives and requirements
• Preparing a system safety program plan
• System safety program plan contents
• Integrated system safety program plan
• Program balance & interfaces
4. System Safety Guidelines for Contracting
• contracting principles
• contracting
• evaluating bidding contractors (system safety checklist)
• managing contractor system safety (contract oversight)
5. Integrated System Hazard Analysis
• Integrated approach
• Risk control
• Use of historical data
6. Safety Analysis – Hazard Analysis Tasks
• The design process
• Analysis
• Qualitative and quantitative analysis
• Design and pre-design safety
• How to review and/or specify a safety analysis
• Evaluating a preliminary hazard analysis
7. Analysis Techniques
• Analysis techniques
• Introduction
• Fault hazard analysis
• Fault tree analysis
• Common cause failure analysis
8. Test and Evaluation Safety
• Tests conducted specifically for safety
• Tests conducted for purposes other than safety
• Test safety analysis
• Other test and evaluation safety considerations
9. Facilities System Safety
• New facility system safety
• Existing facilities
• Facility system safety program
• Analytical techniques
• Facility risk analysis methodology
10. Operational Risk Management (ORM)
• Defining risk and risk management
• ORM principles
• The ORM process summary
• Implementing the ORM process
11. Human Factors Engineering and Safety Principles & Practice
• Human factors process overview
• Managing the human factors program
• Establish human factors requirements
• Conduct human factors integration
• Human factors in system-to-system interfaces
• Human factors engineering and safety guidelines
12. Successful health and safety Management
13. Managing health and safety
14. Safety guidance -Notification and marking of sites
Jadwal Training Terbaru di Tahun 2025
Januari : 16-17 Januari 2025
Februari : 13-14 Februari 2025
Maret : 5-6 Maret 2025
April : 24-25 April 2025
Mei : 21-22 Mei 2025
Juni : 11-12 Juni 2025
Juli : 16-17 Juli 2025
Agustus : 20-21 Agustus 2025
September : 17-18 September 2025
Oktober : 8-9 Oktober 2025
November : 12-13 November 2025
Desember : 17-18 Desember 2025
Jadwal tersebut juga dapat disesuaikan dengan kebutuhan calon peserta
Pemateri/ Trainer
Pelatihan ini akan diberikan oleh Trainer dari kalangan Praktisi, Akademisi dan Konsultan berpengalaman di bidangnya masing-masing.
FAQ tentang Surya Training
A : Berapa minimal running pelatihan ini ?
Q : Pelatihan ini akan running idealnya minimal dengan 3 peserta
A : Apakah bisa jika saya hanya ingin pelatihan sendiri aja / private course ?
Q : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien
A : Dimana saja pelatihan biasanya di selenggarakan?
Q : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia
A : Apakah bisa diselenggarakan selain di kota lain?
B : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas
A : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
B : Bisa diselenggarakan secara IHT di Perusahaan klien
Q : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
A : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien. Namun konfirmasi minimal 2 minggu sebelum pelaksaan pelatihan.
Informasi lebih lanjut
Customer Service : +62 822-9767-5557 (Available WhatsApp)
email : cro.suryatraining@gmail.com
Post Views:84
Hubungi Marketing Kami
Silahkan komunikasikan kebutuhan Anda kepada kami, dengan senang hati kami akan membantu.
System Safety Engineering And Management (BANDUNG)
TRAINING PURPOSE: pelatihan Safety order of precedence online
1. The system safety engineering and management is intended to describe “how” to set up and implement the safety risk management process.
2. The system safety engineering and management establishes a set of consistent and standardized procedures and analytical tools.
3. The system safety engineering and management is intended for use in support of specific system safety program plans.
4. The system safety engineering and management provides guidance on “how” to perform safety risk management, other questions concerning “when, who, and why” should be addressed through the three types of plans discussed in this document: System Safety Management Plan (SSMP), and a System Safety Program Plan (SSPP), and an Integrated System Safety Program Plan (ISSPP).
5. The system safety engineering and management focuses on “how” to perform safety risk management, while these planning documents describe, the organization’s processes and procedures for implementing system safety.
TRAINING MATERIAL OUTLINE: pelatihan System Safety Guidelines online
1. Principles of System Safety
• Planning principles
• Hazard analysis
• Comparative safety
• Risk management decision making
• Safety order of precedence
• Behavioral-based safety
• Models used by system safety for analysis
2. Safety Assessments Before Investment Decision
• Safety assessments before investment decision
• Operational safety
• Comparative safety assessment (CSA)
3. Post-Investment Decision Safety Activities
• Post-investment decision safety activities
• Objectives and requirements
• Preparing a system safety program plan
• System safety program plan contents
• Integrated system safety program plan
• Program balance & interfaces
4. System Safety Guidelines for Contracting
• contracting principles
• contracting
• evaluating bidding contractors (system safety checklist)
• managing contractor system safety (contract oversight)
5. Integrated System Hazard Analysis
• Integrated approach
• Risk control
• Use of historical data
6. Safety Analysis – Hazard Analysis Tasks
• The design process
• Analysis
• Qualitative and quantitative analysis
• Design and pre-design safety
• How to review and/or specify a safety analysis
• Evaluating a preliminary hazard analysis
7. Analysis Techniques
• Analysis techniques
• Introduction
• Fault hazard analysis
• Fault tree analysis
• Common cause failure analysis
8. Test and Evaluation Safety
• Tests conducted specifically for safety
• Tests conducted for purposes other than safety
• Test safety analysis
• Other test and evaluation safety considerations
9. Facilities System Safety
• New facility system safety
• Existing facilities
• Facility system safety program
• Analytical techniques
• Facility risk analysis methodology
10. Operational Risk Management (ORM)
• Defining risk and risk management
• ORM principles
• The ORM process summary
• Implementing the ORM process
11. Human Factors Engineering and Safety Principles & Practice
• Human factors process overview
• Managing the human factors program
• Establish human factors requirements
• Conduct human factors integration
• Human factors in system-to-system interfaces
• Human factors engineering and safety guidelines
12. Successful health and safety Management
13. Managing health and safety
14. Safety guidance -Notification and marking of sites
Jadwal Training Terbaru di Tahun 2025
