noise control management
permanent threshold shift (PTS)
the effects of noise
Noise Measurement Methods
Noise Control Management
Description training noise control management terbaru
One possible cause of hearing damages on men is the level of noise exposures that beyond the limit of sound pressure level or percent dose allowed for a normal working hours. Industrial workers, who receive noise exposure in their everyday working environment, are vulnerable to experience hearing damage either in the form of temporary (TTS) or permanent threshold shift (PTS). Therefore, the industry should establish a professional program of noise control management in order to protect the health and safety of the workers.
In association with Indonesian regulation for safety and healthy working condition (PP No. 3 1975), limit of Leq 85 dBA noise exposure level for 8 hours working day is required for work places. Instead, a Leq limit of 90 dBA steady noise levels for 8 hours working day is determined in OSHA regulation (1974) for occupational noise. Higher levels of noise will reduce the allowable exposure time or working period of workers; therefore, a feasible administrative or engineering noise controls should be applied. When employees are subjected to noise exposures exceeding the limit stated in OSHA regulation, personal ear protectors, such as, earplug or earmuff, shall be provided.
The objectives of this training are: training permanent threshold shift (pts) terbaru
1. Learn about noise in industry and the effects of noise to workers
Learn about noise measurement and analysis techniques including instrumentation
2. Learn how to design, monitor and implementing a management system for preserving health and safety of workers from noise exposure in industry
3. Learn how to design, monitor and implementing noise control engineering in industry
Materi training the effects of noise murah
* INTRODUCTION
* FUNDAMENTALS OF ACOUSTICS
1. Sound Levels and Decibel Scales
2. Sound Propagation Outdoors and Indoors
3. Air and Structure borne Sound Propagations
* NOISE SOURCES IN INDUSTRY
1. Fan Noise
2. Compressor and Pump Noise
3. Jet Noise
4. Pipe Flow Noise
5. Other Noise Sources
* NOISE MEASUREMENT AND FREQUENCY ANALYSIS
1. Measurement Methods
2. Microphones
3. SLM and Integrating Devices
4. Time Varying Noise and Spectrum Analysis
5. Audiometer
* HEARING CHARACTERISTICS
1. Hearing Mechanism and Threshold of Hearing
2. Loudness Levels and Computation
3. Hearing Loss and Audiometric Test
* EFFECTS OF NOISE ON HUMAN
1. Annoyance Levels
2. Noise Induced Hearing Loss
3. Noise Dose Calculation
* NOISE CONTROL TECHNIQUES
1. Planning a Noise Control Program
2. Noise Control by Planning and Maintenance
3. Enclosure and Barriers
4. Silencers, Mufflers and Attenuators
5. Noise Control by Room Treatment
* NOISE CONTROL MANAGEMENT
1. Priority Planning and Approach
2. Noise survey and Visual Inspection
3. Noise Abatement Procedures and Guidelines
4. Hearing Conservation Program
5. Noise Control Standards and Regulations
* TUTORIALS AND PRACTICAL WORKS
1. Insulation
2. Noise measurement and frequency analysis
3. Noise Dose
Peserta
Pelatihan Ini Sangat Penting Bagi :
The following selected participants should attend this course:
* Electric Engineer/ Supervisor/ Technician
* Plant Maintenance Engineer/ Supervisor/ Superintendent
* Engineer from transformer manufacture
* Staffs who are in charge of ordering, replacement and
* Refurbishing of electrical equipment
* Experience professional who want to review or broaden their understanding of transformer system
* Everybody or professional who wants to broaden knowledge or gain benefit from this course
Metode training the effects of noise terbaru
Presentasi, Diskusi, Simulasi, Studi kasus, Evaluasi
Jadwal Training Terbaru di Tahun 2024
Januari : 16-17 Januari 2025
Februari : 13-14 Februari 2025
Maret : 5-6 Maret 2025
April : 24-25 April 2025
Mei : 21-22 Mei 2025
Juni : 11-12 Juni 2025
Juli : 16-17 Juli 2025
Agustus : 20-21 Agustus 2025
September : 17-18 September 2025
Oktober : 8-9 Oktober 2025
November : 12-13 November 2025
Desember : 17-18 Desember 2025
Jadwal tersebut juga dapat disesuaikan dengan kebutuhan calon peserta
Pemateri/ Trainer
Pelatihan ini akan diberikan oleh Trainer dari kalangan Praktisi, Akademisi dan Konsultan berpengalaman di bidangnya masing-masing.
FAQ tentang Surya Training
A : Berapa minimal running pelatihan ini ?
Q : Pelatihan ini akan running idealnya minimal dengan 3 peserta
A : Apakah bisa jika saya hanya ingin pelatihan sendiri aja / private course ?
Q : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien
A : Dimana saja pelatihan biasanya di selenggarakan?
Q : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia
A : Apakah bisa diselenggarakan selain di kota lain?
B : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas
A : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
B : Bisa diselenggarakan secara IHT di Perusahaan klien
Q : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
A : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien. Namun konfirmasi minimal 2 minggu sebelum pelaksaan pelatihan.
Informasi lebih lanjut
Customer Service : +62 822-9767-5557 (Available WhatsApp)
email : cro.suryatraining@gmail.com
Post Views:158
Hubungi Marketing Kami
Silahkan komunikasikan kebutuhan Anda kepada kami, dengan senang hati kami akan membantu.
noise control management
permanent threshold shift (PTS)
the effects of noise
Noise Measurement Methods
Noise Control Management
Description training noise control management terbaru
One possible cause of hearing damages on men is the level of noise exposures that beyond the limit of sound pressure level or percent dose allowed for a normal working hours. Industrial workers, who receive noise exposure in their everyday working environment, are vulnerable to experience hearing damage either in the form of temporary (TTS) or permanent threshold shift (PTS). Therefore, the industry should establish a professional program of noise control management in order to protect the health and safety of the workers.
In association with Indonesian regulation for safety and healthy working condition (PP No. 3 1975), limit of Leq 85 dBA noise exposure level for 8 hours working day is required for work places. Instead, a Leq limit of 90 dBA steady noise levels for 8 hours working day is determined in OSHA regulation (1974) for occupational noise. Higher levels of noise will reduce the allowable exposure time or working period of workers; therefore, a feasible administrative or engineering noise controls should be applied. When employees are subjected to noise exposures exceeding the limit stated in OSHA regulation, personal ear protectors, such as, earplug or earmuff, shall be provided.
The objectives of this training are: training permanent threshold shift (pts) terbaru
1. Learn about noise in industry and the effects of noise to workers
Learn about noise measurement and analysis techniques including instrumentation
2. Learn how to design, monitor and implementing a management system for preserving health and safety of workers from noise exposure in industry
3. Learn how to design, monitor and implementing noise control engineering in industry
Materi training the effects of noise murah
* INTRODUCTION
* FUNDAMENTALS OF ACOUSTICS
1. Sound Levels and Decibel Scales
2. Sound Propagation Outdoors and Indoors
3. Air and Structure borne Sound Propagations
* NOISE SOURCES IN INDUSTRY
1. Fan Noise
2. Compressor and Pump Noise
3. Jet Noise
4. Pipe Flow Noise
5. Other Noise Sources
* NOISE MEASUREMENT AND FREQUENCY ANALYSIS
1. Measurement Methods
2. Microphones
3. SLM and Integrating Devices
4. Time Varying Noise and Spectrum Analysis
5. Audiometer
* HEARING CHARACTERISTICS
1. Hearing Mechanism and Threshold of Hearing
2. Loudness Levels and Computation
3. Hearing Loss and Audiometric Test
* EFFECTS OF NOISE ON HUMAN
1. Annoyance Levels
2. Noise Induced Hearing Loss
3. Noise Dose Calculation
* NOISE CONTROL TECHNIQUES
1. Planning a Noise Control Program
2. Noise Control by Planning and Maintenance
3. Enclosure and Barriers
4. Silencers, Mufflers and Attenuators
5. Noise Control by Room Treatment
* NOISE CONTROL MANAGEMENT
1. Priority Planning and Approach
2. Noise survey and Visual Inspection
3. Noise Abatement Procedures and Guidelines
4. Hearing Conservation Program
5. Noise Control Standards and Regulations
* TUTORIALS AND PRACTICAL WORKS
1. Insulation
2. Noise measurement and frequency analysis
3. Noise Dose
Peserta
Pelatihan Ini Sangat Penting Bagi :
The following selected participants should attend this course:
* Electric Engineer/ Supervisor/ Technician
* Plant Maintenance Engineer/ Supervisor/ Superintendent
* Engineer from transformer manufacture
* Staffs who are in charge of ordering, replacement and
* Refurbishing of electrical equipment
* Experience professional who want to review or broaden their understanding of transformer system
* Everybody or professional who wants to broaden knowledge or gain benefit from this course
Metode training the effects of noise terbaru
Presentasi, Diskusi, Simulasi, Studi kasus, Evaluasi
